Contact Us New & Updated Parts
Model: Jeep Wrangler JK (2007-Present)
Cart 0 item(s): $0.00
   
Catalog
Accessory Package kits
AMC Books
Axle & Differential Parts
Body Parts
Brake Parts
Chry Book
Clutch & Flywheel Parts
Cooling System Parts
Electrical Parts
Engine Parts
Exhaust Parts
Fuel Parts
Fuel System Parts
Heating & A/C Parts
Kaiser Books
Misc. Parts
Steering System Parts
Suspension Parts
Transfer Case Parts
Transmission Parts
Tune Up Parts
Wiper System Parts
 
FLARE KIT JK WRANGLER POCKET FRONT 2/4 DOOR Add a custom look to your Jeep! Decorative stainless steel Torx bolts give the �bolt-on� look without touching the vehicle�s surface. OEM style matte black finish, or easily custom painted. No vehicle body side drilling or cutting - installs matte black finish, or easily custom painted. No vehicle body side drilling or cutting - installs using the existing factory holes. Replaces: BSW-1004502 Made in USA UPC: 804314069384 Label: FLARE KIT JK POCKET FR 2/4DR
FLARE KIT JK WRANGLER POCKET FRONT 2/4 DOOR
Model(s): Jeep Wrangler JK (2007-Present) 		ENTRY GUARD PAIR STAINLESS STEEL JK WRANGLER 4-DOOR 3M TAPE 07-08 Durable polished Stainless steel design for great looks and ultimate protection. No drill attachment makes installation a breeze. Tough automotive grade tape secures the entry guards to the vehicle. grade tape secures the entry guards to the vehicle. Replaces: 11119.05 Made in TAIWAN UPC: 804314115845 Label: ENTRY GRD PR SS JK-4DR 07-08
ENTRY GUARD PAIR STAINLESS STEEL JK WRANGLER 4-DOOR 3M TAPE 07-08
Model(s): Jeep Wrangler JK (2007-Present) 		HITCH REAR JK 07 - UP RATED AT 3500LBS FOR 4DR AND 2000LBS FOR 2DR BLK Custom design bolts directly to factory mounting points on the rear of the vehicle, very similar design to the OE Receiver Hitch. Durable powdercoat design sheds water and provides a long lasting rust free finish. Includes cutout for powdercoat design sheds water and provides a long lasting rust free finish. Includes cutout for factory wiring harness mounting. Designed as a one-piece welded assembly for added strength, we built our hitch receiver to match the towing capacity of your Jeep: 3,500-lb tow rating, 350-lb tongue weight rating with weight distributing equipment; otherwise 2000-lb tow rating, 200-lb tongue weight rating, 2" opening. Replaces: 11580.10 Made in CHINA UPC: 804314117054 Label: HITCH REAR JK 2007 - UP BLK
HITCH REAR JK 07 - UP RATED AT 3500LBS FOR 4DR AND 2000LBS FOR 2DR BLK
Model(s): Jeep MB (1941–1945), Jeep Wrangler JK (2007-Pre... 		ARMREST PAD BLACK / GRAY NEOPRENE JK 07-08 Bolts directly into existing JK mounting screws-no need to remove the OE lid. Steel brackets ensure durability. Uses either Neoprene or tough vinyl coated polyester fabric with a dense foam center for comfort, performance and a great look in the coated polyester fabric with a dense foam center for comfort, performance and a great look in the vehicle. Allows for full opening and closing of the console lid. No drilling required. Patent Pending. Replaces: 13107.09 Made in CHINA UPC: 804314163471 Label: ARMRST PAD BLK/GRY NP JK 07-08
ARMREST PAD BLACK / GRAY NEOPRENE JK 07-08
Model(s): Jeep Wrangler JK (2007-Present)
Price: $962.25 each Price: $107.85 each Price: $134.53 each Price: $91.89 each
FLARE KIT JK WRANGLER 4 DOOR REAR PAIR Add a custom look to your Jeep! Decorative stainless steel Torx bolts give the �bolt-on� look without touching the vehicle�s surface. OEM style matte black finish, or easily custom painted. No vehicle body side drilling or cutting - installs matte black finish, or easily custom painted. No vehicle body side drilling or cutting - installs using the existing factory holes. Replaces: BSW-1004402 Made in USA UPC: 804314069377 Label: FLARE KIT 4JK 4 DOOR REAR PAIR
FLARE KIT JK WRANGLER 4 DOOR REAR PAIR
Model(s): Jeep Wrangler JK (2007-Present) 		FENDER FLARE KIT, BESTOP HIGHROCK, JK 07-08, 2-DOOR OR 4-DOOR Replaces: 49250-01 Made in 0 UPC: 804314171858 Label: FENDER FLARES JK 07-08 BESTOP
FENDER FLARE KIT, BESTOP HIGHROCK, JK 07-08, 2-DOOR OR 4-DOOR
Model(s): Jeep Wrangler JK (2007-Present) 		GRILLE INSERT BILLET SET BLACK ALUMINUM JK WRANGLER 07-09 Durable UV treated inserts enhance the front of your Jeep�. These inserts add great styling and a unique appearance. All Rugged Ridge inserts easily install without drilling or tools. Just click them in and go! install without drilling or tools. Just click them in and go! Replaces: 11401.30 Made in CHINA UPC: 804314116361 Label: GRILLE INSERT BILLET BLK AL JK
GRILLE INSERT BILLET SET BLACK ALUMINUM JK WRANGLER 07-09
Model(s): Jeep Wrangler JK (2007-Present) 		CAT BACK KIT VORTEX PRO JK 07-09 Replaces: 17606.55 Made in US UPC: 804314170202 Label: CAT BACK KIT VORTEX JK 07-09
CAT BACK KIT VORTEX PRO JK 07-09
Model(s): Jeep Wrangler JK (2007-Present)
Price: $690.02 each Price: discontinued Price: $263.91 each Price: $843.10 each
PINION CRUSH SPACER 02-06 KJ FRONT DANA 30, 07 JK FRONT DANA 30 DANA 44 Pinion Crush Spacer 2002-06 KJ Frt D30 2007 JK FRT D30, D44 2002-07 KJ FRT D30 Replaces: 5066047AA Made in USA UPC: 804314134105 Label: 16512.65 CRUSH SPACER F D30 JK
PINION CRUSH SPACER 02-06 KJ FRONT DANA 30, 07 JK FRONT DANA 30 DANA 44
Model(s): Jeep Liberty KJ (2002-2007), Jeep Wrangler JK (... 		Axle Oil Slinger Front JK 07-08 Dana 30/Dana 44 Axle Oil Slinger Front 2007 JK D30/D44 Replaces: 5083669AA Made in 0 UPC: 804314134594 Label: AXLE SLINGER FT D30 D44 JK 07
Axle Oil Slinger Front JK 07-08 Dana 30/Dana 44
Model(s): Jeep Wrangler JK (2007-Present) 		DUAL REAR GRAB STRAP JK BLACK 07-09 For those offroad adventures, we have developed a Center Dual Roll Bar Grab Handle design that attaches to factory mounting points on the center roll bar hoop. roll bar hoop. Replaces: 13305.12 Made in TAIWAN UPC: 804314119690 Label: DUAL REAR GRAB STRAP JK BLK
DUAL REAR GRAB STRAP JK BLACK 07-09
Model(s): Jeep Wrangler JK (2007-Present) 		SIDE ARMOR 2-DOOR TEXTURED BLACK JK WRANGLER 07-08 PAIR Keep your rocker panels from being beaten to a pulp on the trail with Rugged Ridge's Side Armor. Built from heavy-duty 2" x 0.120" black texture powdercoated steel tubing, these guards will take the beating that was meant for your body powdercoated steel tubing, these guards will take the beating that was meant for your body sheetmetal. Simple bolt-on design utilizes existing body mount locations for a secure, rattle free installation. The black texture finish resists scratches and gives a slip-resistant surface for door entry. Sold as a pair and includes all necessary installation hardware. Will fit Rubicon models, but factory rocker guard must be removed. Replaces: 11504.21 Made in CHINA UPC: 804314116583 Label: SIDE ARMOR 2DR BLK JK 07-09 PR
SIDE ARMOR 2-DOOR TEXTURED BLACK JK WRANGLER 07-08 PAIR
Model(s): Jeep Wrangler JK (2007-Present)
Price: $11.55 each Price: $3.09 each Price: $70.50 each Price: $618.56 each
LIFT KIT WITHOUT SHOCKS, RUGGED RIDGE ORV, JK 07-09 2-DOOR 3.5 INCH, JK 07-09 4-DOOR 2.5 INCH Kit includes: (4) coil springs, rear track bar bracket, rear bump stop bracket, rear track bar brace, and hardware kit. NOTE: Due to vehicle weight, the 2 door models may receive an additional 1-inch lift over 4 door models. weight, the 2 door models may receive an additional 1-inch lift over 4 door models. Replaces: 18401.50 Made in USA UPC: 804314165697 Label: LIFT KIT 2.5-3.5IN JK 07-09
LIFT KIT WITHOUT SHOCKS, RUGGED RIDGE ORV, JK 07-09 2-DOOR 3.5 INCH, JK 07-09 4-DOOR 2.5 INCH
Model(s): Jeep Wrangler JK (2007-Present) 		PINION SHIM KIT 99-03 WJ REAR DANA 44, 07 JK FRONT DANA 30 DANA 44, 07 JK REAR DANA 35 DANA 44 .040 TO.044 2007 JK FRT D30 D44 2007 JK REAR D35 D44 Replaces: 4856369 Made in USA UPC: 804314032357 Label: 16519.03 SHIM KT D30/35/44
PINION SHIM KIT 99-03 WJ REAR DANA 44, 07 JK FRONT DANA 30 DANA 44, 07 JK REAR DANA 35 DANA 44 .040 TO.044
Model(s): Jeep Grand Cherokee WJ (1999-2004), Jeep Wrangl... 		BUMPER REAR XHD, TEXTURED BLACK, RUGGED RIDGE JK 07-09 Make the most of your rear bumper with our XHD Rear Bumper System. Features easy installation, amazing looks and two reinforced heavy duty D-Ring attachment points. Special "inner mounting plate" provides an extremely secure mounting point - attachment points. Special "inner mounting plate" provides an extremely secure mounting point - strong enough for offroad use! The two-piece design allows use with and without tire carrier options. Heavy duty powdercoated steel design looks great but is extremely tough. Mount on the optional Tire Carrier and you can hold up to a 35" tire. Replaces: 11546.20 Made in CHINA UPC: 804314116699 Label: BUMPER REAR XHD TEX BLACK JK
BUMPER REAR XHD, TEXTURED BLACK, RUGGED RIDGE JK 07-09
Model(s): Jeep Wrangler JK (2007-Present) 		SOFT TOP DISCONNECT KIT, RUGGED RIDGE, 4-PIECES 4 DOOR ONLY JK 07-08 Replaces: 11251.04 Made in TAIWAN UPC: 804314168278 Label: DISCONNECT KIT SOFTTOP JK 4DR
SOFT TOP DISCONNECT KIT, RUGGED RIDGE, 4-PIECES 4 DOOR ONLY JK 07-08
Model(s): Jeep Wrangler JK (2007-Present)
Price: $780.02 each Price: $51.66 each Price: $1310.47 each Price: $93.84 each
REPLACE-A-TOP, BESTOP, BESTOP, SAILCLOTH JK Bestop�s new Sailcloth Replace-a-top is 50% quieter than a factory denim top. The secret lies in the unique multi-ply Sailcloth fabric. Each ply plays a different role, but together they reflect road sounds, absorb wind noise, and prevent plays a different role, but together they reflect road sounds, absorb wind noise, and prevent buffeting to create a silencing effect that absolutely must be heard to be believed. In addition, the beefier Sailcloth fabric resists temperature-induced shrinkage, making cold-weather installations much easier. It also shows fewer waves and wrinkles than conventional tops and cleans more easily to help make your rig look really sharp! Replaces: 79137-36 Made in USA UPC: 804314148645 Label: REPLACE-A-TOP, SAILCLOTH JK
REPLACE-A-TOP, BESTOP, BESTOP, SAILCLOTH JK
Model(s): Jeep Wrangler JK (2007-Present) 		GRAB HANDLE, ULTIMATE REAR PAIR JK BLACK (ALSO FITS FRONT WINDSHIELD PILLAR LOCATION) 07-09 Rear Side Grab Handles offer easy entry and exit attach directly into factory mounting holes with your original hardware. They also double as Front Seat Grab Handles by easily attaching to the windshield pillar with supplied hardware. Seat Grab Handles by easily attaching to the windshield pillar with supplied hardware. Replaces: 13305.14 Made in TAIWAN UPC: 804314119713 Label: GRAB HANDLE ULT. REAR PR JK BL
GRAB HANDLE, ULTIMATE REAR PAIR JK BLACK (ALSO FITS FRONT WINDSHIELD PILLAR LOCATION) 07-09
Model(s): Jeep Wrangler JK (2007-Present) 		REAR TRACK BAR RELOCATION BRACKET, SKYJACKER, JK WRANGLER 07-09 Replaces: SJ-JK24RTB-B Made in 0 UPC: 804314169725 Label: TRACK BAR RELO BRACKET REAR JK
REAR TRACK BAR RELOCATION BRACKET, SKYJACKER, JK WRANGLER 07-09
Model(s): Jeep Full Size Cherokee/Wagoneer SJ (1963-1993)... 		SIDE MARKER LIGHT RH JEEP WRANGLER (JK) 07-09 Replaces: 55078144AA Made in TAIWAN UPC: 804314168544 Label: SIDE MARKER LIGHT RH JK 07-09
SIDE MARKER LIGHT RH JEEP WRANGLER (JK) 07-09
Model(s): Jeep Wrangler JK (2007-Present)
Price: $1653.34 each Price: $33.07 each Price: $109.59 each Price: $54.79 each

Jeep Parts Guy.com stocks both new and used factory replacement parts from 1941 - 2008. Our full line is inexpensive and cheaper than our competitors, but the quality is just as good as the OEM parts! We have a full line of lift kits and an endless supply of accessories for Jeeps of all years. We understand that Jeep is the most accessorized vehicle in the market and we are confident that we can take care of your every Jeep need. Jeep Parts Guy is constantly adding new products, if you don't see what you're looking for, chances are we have it. Just give us a call and ask.

Call to Order: 866-235-1979
Credit Card Badges
©2026 Pacific Supply Group | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.