Contact Us New & Updated Parts
Model: Jeep MB (1941–1945)
Cart 0 item(s): $0.00
   
Catalog
Accessory Package kits
AMC Books
Axle & Differential Parts
Body Parts
Brake Parts
Chry Book
Clutch & Flywheel Parts
Cooling System Parts
Electrical Parts
Engine Parts
Exhaust Parts
Fuel Parts
Fuel System Parts
Heating & A/C Parts
Kaiser Books
Misc. Parts
Steering System Parts
Suspension Parts
Transfer Case Parts
Transmission Parts
Tune Up Parts
Wiper System Parts
 
WHEEL SPLIT STYLE MB Replaces: 640800-MB Made in PHILIPPINE UPC: 804314146313 Label: 16725.02 WHEEL SPLIT STYLE MB
WHEEL SPLIT STYLE MB
Model(s): Jeep MB (1941–1945) 		BUMPER FORD SUPER DUTY 99-04 ARB bumpers incorporate a fully engineered mounting system which completely replaces the standard bumper. ARB pioneered the five fold upswept and tapered wing design, which provides enormous strength and maintains an optimum upswept and tapered wing design, which provides enormous strength and maintains an optimum approach angle. Mounting a winch requires a properly supported structure designed to accommodate the stresses of winching. All ARB numbers are designed and tested to endure and exceed such loads. Replaces: ARB-3436030 Made in AUSTRALIA UPC: 804314065171 Label: BUMPER FORD S/DUTY 99-04
BUMPER FORD SUPER DUTY 99-04
Model(s): Jeep MB (1941–1945) 		NP231 TRANSFER CASE SLIP YOKE ELIMINATOR KIT, 87-06 JEEP WRANGLER This kit is a MUST if you installed a 2" or taller suspension lift in your 1987-2006 Jeep� Wrangler (not needed for body lifted Jeeps�). The kit fits all newer production NP 231 transfer cases (1987- up). A Slip Yoke Eliminator Kit (SYE) will all newer production NP 231 transfer cases (1987- up). A Slip Yoke Eliminator Kit (SYE) will eliminate the need to drop your transfer case in order to avoid drive train vibrations that are caused by taller suspension lift. The purpose of this kit is to replace the slip yoke portion of the NP 231 with a fixed yoke and CV-style drive shaft assembly. This is the most complete and strongest kit available. Replaces: 52231 Made in TAIWAN UPC: 804314005146 Label: 18676.60 SLIP YOKE ELIMINATOR
NP231 TRANSFER CASE SLIP YOKE ELIMINATOR KIT, 87-06 JEEP WRANGLER
Model(s): Jeep MB (1941–1945) 		HOSE GAS FILLER CJ8 SCRAMBLER Replaces: 5364196 Made in TAIWAN UPC: 804314036744 Label: 17740.05 HOSE GAS FILLER CJ8
HOSE GAS FILLER CJ8 SCRAMBLER
Model(s): Jeep MB (1941–1945), Jeep Scrambler CJ8 (1981-1...
Price: $433.23 each Price: $3715.97 each Price: $410.15 each Price: $68.52 each
TRAILMAX II FOLD AND TUMBLE REAR BENCH SEAT VINYL SPICE Replaces: 39440-37 Made in 0 UPC: 804314173746 Label: SEATTMII FD/TBL RR VINYL SPICE
TRAILMAX II FOLD AND TUMBLE REAR BENCH SEAT VINYL SPICE
Model(s): Jeep MB (1941–1945) 		ROCK BARZ WITH ALUMINUM STEP 97-01 TJ Rock Barz are a combination entry step and rocker guard protector. The heavy duty steel entry step protects from wheel well to wheel well without drasticly reducing clearance or drilling holes in the body. Includes diamond plate non-skid step drasticly reducing clearance or drilling holes in the body. Includes diamond plate non-skid step plate and polyurethane end caps. Replaces: WAR7500 Made in USA UPC: 804314112714 Label: ROCK BARZ W/AL STEP 97-01 T
ROCK BARZ WITH ALUMINUM STEP 97-01 TJ
Model(s): Jeep MB (1941–1945), Jeep Wrangler TJ (1997-2006) 		THIS PART IS NO LONGER AVAILABLE!! CROSSMEMBER FRONT ZJ Replaces: 55255200 Made in TAIWAN UPC: 804314058203 Label: 12037.08 CROSSMEMBER FRT ZJ
CROSSMEMBER FRONT ZJ
Model(s): Jeep Grand Cherokee ZJ (1993-1998), Jeep MB (19... 		IGNITION, 6-OFFROAD The MSD 6-Offroad Ignition Control will provide your engine the spark power it needs to get you over, through, under and around any obstacles you encounter. From an idle to 3,000 rpm the MSD produces multiple sparks rather than just a single encounter. From an idle to 3,000 rpm the MSD produces multiple sparks rather than just a single spark which is a great benefit when you�re crawling over rocks or creeping up steep grades. This spark series lasts for 20� of crankshaft rotation and ensures complete combustion of the fuel mixture producing quick throttle response and a smooth idle. To battle the harsh off-road elements, the 6-Offroad is completely potted with an epoxy compound called Ciba�. This material encases the circuits creating a water and vibration proof ignition. Weathertight connectors are also installed to provide positive locking and water resistant electrical connections. The 6-Offroad will install to virtually any vehicle with a 12 volt electrical system and a distributor. It will connect to points, amplifiers or magnetic pickups on 4, 6 or 8-cylinder engines. Replaces: MSD6470 Made in USA UPC: 804314075439 Label: IGN., 6-OFFROAD
IGNITION, 6-OFFROAD
Model(s): Jeep MB (1941–1945)
Price: $593.33 each Price: $1060.60 each Price: Call for Availability Price: $826.26 each
DISTRIBUTOR CAP 41-62 MB/CJ Replaces: A-9307 Made in USA UPC: 804314068714 Label: 17244.01 CAP DISTR 41-62 MB/CJ
DISTRIBUTOR CAP 41-62 MB/CJ
Model(s): Jeep MB (1941–1945) 		PRO FRONT RECLINING FABRIC SEAT, GRAY The Trailmax�Pro is Bestop�s flagship seat. Larger side bolsters with bolster boosters and sculpted lumbar support increase comfort tremendously. Add an adjustable headrest, map pocket and the performance features found in all Bestop seats and an adjustable headrest, map pocket and the performance features found in all Bestop seats and you have one of the best seats on the market today. Replaces: 39346-09 Made in MALAYSIA UPC: 804314128272 Label: PRO FR REC FABRIC SEAT, GRAY
PRO FRONT RECLINING FABRIC SEAT, GRAY
Model(s): Jeep MB (1941–1945) 		FENDER FLARE KIT, 81-86 CJ8 SCRAMBLER Rugged Ridge provides the most comprehensive replacement Fender Flare program on the market today. Covering model years starting in 1955 until current, Rugged Ridge has you covered when it is time to replace or upgrade your Factory Fender current, Rugged Ridge has you covered when it is time to replace or upgrade your Factory Fender Flares. Each flare is constructed of virtually indestructible, durable, UV treated thermoplastic to provide years of service. Each replacement flare is designed to fit into your factory mounting holes (some models may require some hole relocation) for ease of installation. This is a 4-piece kit with hardware. Replaces: 5455072K Made in TAIWAN UPC: 804314141783 Label: 11604.01 FLARE KIT 4PC CJ8
FENDER FLARE KIT, 81-86 CJ8 SCRAMBLER
Model(s): Jeep MB (1941–1945), Jeep Scrambler CJ8 (1981-1... 		WINDOW ASSEMBLY VENT Geniune Jeep� surplus item. Replaces: S-55235683 Made in 0 UPC: 804314103613 Label: WINDOW ASSY VENT
WINDOW ASSEMBLY VENT
Model(s): Jeep MB (1941–1945)
Price: $28.10 each Price: $667.87 each Price: $226.48 each Price: $97.97 each
TRAILMAX II FOLD AND TUMBLE REAR BENCH SEAT FABRIC SPICE CJ 55-95 Replaces: 39441-37 Made in 0 UPC: 804314173777 Label: SEAT TMII RR BNCHSPIC CJ 55-95
TRAILMAX II FOLD AND TUMBLE REAR BENCH SEAT FABRIC SPICE CJ 55-95
Model(s): Jeep MB (1941–1945) 		LEVER ASSEMBLY CP Geniune Jeep� surplus item. Replaces: S-52127958 Made in 0 UPC: 804314095826 Label: LEVER ASY CP
LEVER ASSEMBLY CP
Model(s): Jeep MB (1941–1945) 		HD DRAG LINK, SHORT TUBE, 82-86 CJ7, 82-86 CJ8 SCRAMBLER, INCLUDES TWO TIE ROD ENDS Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles. Replaces: 18050.55 Made in TAIWAN UPC: 804314123727 Label: DRAG LINK KIT CJ7-8 WIDE T F9
HD DRAG LINK, SHORT TUBE, 82-86 CJ7, 82-86 CJ8 SCRAMBLER, INCLUDES TWO TIE ROD ENDS
Model(s): Jeep CJ7 (1976-1986), Jeep MB (1941–1945), Jeep... 		COWL SIDE LH MB GPW Replaces: A-3008 Made in PHILIPPINE UPC: 804314067243 Label: 12010.01 COWL SIDE LH MB GPW
COWL SIDE LH MB GPW
Model(s): Jeep MB (1941–1945)
Price: $632.00 each Price: $182.33 each Price: $180.53 each Price: $268.92 each
AIR CLEANER ASSEMBLY, K&N, 14-INCH CHROME Increased performance and added fuel economy! This stock replacement air filter is designed to increase horsepower and acceleration while providing excellent filtration. Backed up K&N�s lifetime warranty. providing excellent filtration. Backed up K&N�s lifetime warranty. Replaces: KN-601264 Made in USA UPC: 804314073763 Label: AIR CLEANER ASY 14-IN CH F9
AIR CLEANER ASSEMBLY, K&N, 14-INCH CHROME
Model(s): Jeep MB (1941–1945) 		HEADLIGHT ASSEMBLY RH TJ Replaces: 55055032AC Made in USA UPC: 804314142407 Label: 12402.04 HEADLAMP ASM RH TJ
HEADLIGHT ASSEMBLY RH TJ
Model(s): Jeep MB (1941–1945), Jeep Wrangler TJ (1997-2006) 		FLOOR FRONT MB GP Replaces: 671019-MB Made in PHILIPPINE UPC: 804314146702 Label: 12007.01 FLOOR FRT MB GP
FLOOR FRONT MB GP
Model(s): Jeep MB (1941–1945) 		AXLE ASSEMBLY FRONT ABS TJ/ZJ Replaces: 4874306 Made in MEXICO UPC: 804314032531 Label: 16523.18 AXLE ASM FR ABS T/Z
AXLE ASSEMBLY FRONT ABS TJ/ZJ
Model(s): Jeep Grand Cherokee ZJ (1993-1998), Jeep MB (19...
Price: $229.75 each Price: $151.48 each Price: $1155.20 each Price: $391.25 each

Jeep Parts Guy.com stocks both new and used factory replacement parts from 1941 - 2008. Our full line is inexpensive and cheaper than our competitors, but the quality is just as good as the OEM parts! We have a full line of lift kits and an endless supply of accessories for Jeeps of all years. We understand that Jeep is the most accessorized vehicle in the market and we are confident that we can take care of your every Jeep need. Jeep Parts Guy is constantly adding new products, if you don't see what you're looking for, chances are we have it. Just give us a call and ask.

Call to Order: 866-235-1979
Credit Card Badges
©2026 Pacific Supply Group | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.