Contact Us New & Updated Parts
Model: Jeep CJ6 (1955-1975)
Cart 0 item(s): $0.00
   
Catalog
Accessory Package kits
AMC Books
Axle & Differential Parts
Body Parts
Brake Parts
Chry Book
Clutch & Flywheel Parts
Cooling System Parts
Electrical Parts
Engine Parts
Exhaust Parts
Fuel Parts
Fuel System Parts
Heating & A/C Parts
Kaiser Books
Misc. Parts
Steering System Parts
Suspension Parts
Transfer Case Parts
Transmission Parts
Tune Up Parts
Wiper System Parts
 
WINDSHIELD FRAME 69-75 CJ5/CJ6 Replaces: 987996 Made in TAIWAN UPC: 804314020477 Label: 12006.07 FRAME W/S 69-75 CJ5/6
WINDSHIELD FRAME 69-75 CJ5/CJ6
Model(s): Jeep CJ5 (1954-1983), Jeep CJ6 (1955-1975) 		This a Front Hub Dust Cap. Keep the dirt and dust out of your wheel bearings. This will fit the following vehicles: 1941-1945 Jeep MB 1945-1964 Jeep CJ models Factory Part Number: J0641920
Dust Cap (Front Hub) - CJ, MB
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J... 		This is a Brand New replacement Accelerator Pedal. This is specific for the following models: 1953-1971 Jeep CJ models (With 4 cyl engines)
Accelerator Pedal - CJ With 4 Cyl Motor
Model(s): Jeep CJ3A (1949-1953), Jeep CJ3B (1953-1968), J... 		These are Left or Right Front Brake Wheel Cylinders - These will fit the 1954-1965 Jeep CJ models w/o the angle hose connection. If your wheel cylinders are leaking, get them fixed today! This picture does not represent the actual item.
Wheel Cylinder (L Or R Front) - CJ W/o Angle Hose Connection
Model(s): Jeep CJ3B (1953-1968), Jeep CJ5 (1954-1983), Je...
Price: $358.84 each Price: $5.74 each Price: $37.13 each Price: $30.44 each
WINDSHIELD FRAME 55-68 CJ5/CJ6 Replaces: 973727 Made in TAIWAN UPC: 804314020163 Label: 12006.06 FRAME W/S 55-68 CJ5/6
WINDSHIELD FRAME 55-68 CJ5/CJ6
Model(s): Jeep CJ5 (1954-1983), Jeep CJ6 (1955-1975) 		FENDER FLARE KIT, 4-PIECE, CJ5, CJ6, CJ7 Rugged Ridge provides the most comprehensive replacement Fender Flare program on the market today. Covering model years starting in 1955 until current, Rugged Ridge has you covered when it is time to replace or upgrade your Factory Fender current, Rugged Ridge has you covered when it is time to replace or upgrade your Factory Fender Flares. Each flare is constructed of virtually indestructible, durable, UV treated thermoplastic to provide years of service. Each replacement flare is designed to fit into your factory mounting holes (some models may require some hole relocation) for ease of installation. This is a 4-piece kit with hardware. Replaces: 8997109 Made in TAIWAN UPC: 804314049027 Label: 11601.01 FLARE KIT 4PC CJ
FENDER FLARE KIT, 4-PIECE, CJ5, CJ6, CJ7
Model(s): Jeep CJ5 (1954-1983), Jeep CJ6 (1955-1975), Jee... 		HD TIE ROD, LONG TUBE, 72-83 CJ5, 72-77 CJ6, 76-81 CJ7, 81 CJ8 SCRAMBLER, INCLUDES TWO TIE ROD ENDS Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles. Replaces: 18050.54 Made in TAIWAN UPC: 804314123710 Label: TUBE+TIE RODS HD 72-83 CJ5 F9
HD TIE ROD, LONG TUBE, 72-83 CJ5, 72-77 CJ6, 76-81 CJ7, 81 CJ8 SCRAMBLER, INCLUDES TWO TIE ROD ENDS
Model(s): Jeep CJ5 (1954-1983), Jeep CJ6 (1955-1975), Jee... 		4 cyl. Fuel pump (with vaccum wipers) Does Not Include Glass Bowl. This pump will fit the following vehicles: 1941-45 4 CYL 134 MB & GPW 1946-49 4 CYL 134 CJ2A 1948-53 4 CYL 134 CJ3A 1953-65 4 CYL 134 CJ3B 1955-71 4 CYL 134 CJ5 1955-71 4 CYL 134 CJ6 Factory Part Number: J120206
Fuel Pump - 4 Cyl With Vaccum Wipers
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $348.97 each Price: $126.95 each Price: $191.37 each Price: $132.38 each
BODY TUB CJ6 55-71 Replaces: 680637-6 Made in PHILIPPINE UPC: 804314147020 Label: 12002.12 TUB CJ6 55-71
BODY TUB CJ6 55-71
Model(s): Jeep CJ6 (1955-1975) 		Command the dark with Rough Country's set of 2-inch Flush Mount Square Cree LED Lights. These powerful yet small LEDs feature an extended housing to sit flush with your bumper, roof rack, or wherever you can imagine! Once installed, these lights look like an OEM factory upgrade. Light up the road with 36 watts and 2880 Lumens of output power. These all-weather LED lights feature a durable, die-cast aluminum housing and include a wiring harness. Includes Rough Country's 3-Year Warranty. FREE SHIPPING FEATURES 2880 lumens 36 watts 30 degree spot beam Each light contains 6, 3 watt high intensity Cree LEDs IP67 Waterproof rating Black panel design Durable die cast aluminum housing Moisture Breather technology reduces moisture build-up behind the lends Includes premium, flat-wound wiring harness with on/off switch Length: 4.80-inches | Depth: 3.11-inches | Height: 3.63-inches Mounting hole to mounting hole: 4.15-inches Sold in pairs 3 year warranty
2in Square Flush Mount Rough Country CREE Black Series LED Fog Lights
Model(s): Honcho Pickup J10 (1976-1983), Honcho Pickup J2... 		Jeep brake master cylinders! These will fit 1949-1966 CJ\'s. Older master cylinders wear out over time, get yours fixed today. They are not rebuilt, they are brand NEW! Factory Part Number: J8126738
Brake Master Cylinder
Model(s): Jeep CJ3A (1949-1953), Jeep CJ3B (1953-1968), J... 		These are Brand New replacement Throttle Cables. These are specific for the following vehicles: 1946-1971 Jeep CJ models (Black) 1941-1945 Jeep MB (Olive) 1950-1952 Jeep M38 (Olive) 1952-1971 Jeep M38A1 (Olive) Remember to Specify Black or Olive according to the model you have.
Throttle Cable (Black Or Olive) - MB, CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $7974.93 each Price: $91.72 each Price: $66.17 each Price: $21.22 each
Jeep accelerator cable (throttle cable) Will fit 1972-1975 Jeep CJ5's, CJ6's, DJ5's, and DJ6's with a 3.8L or 4.2L motor. Cables wear out over time, a broken cable can leave you stranded. Get yours replaced today!
Jeep Accelerator Cable 3.8L-4.2L
Model(s): Jeep CJ5 (1954-1983), Jeep CJ6 (1955-1975) 		1953-66 CJ 9� BRAKE SHOES (LININGS) FRONT OR REAR
Brake Shoes- CJ
Model(s): Jeep CJ3A (1949-1953), Jeep CJ3B (1953-1968), J... 		******NOT AVAILABLE*******Just let the rusty part sit in the solution for 30 minutes and the rust will be converted back in to metal. The safest rust remover on the market. No acids, VOC's or fumes, safe on skin and eyes, removes rust on bare metal. NOT poisonous, water based and non flammable, PH neutral, biodegradable and ready to use. You will love it. MOST EFFECTIVE RUST REMOVER WE HAVE EVER USED.
Rust Remover - Evapo-rust
Model(s): Honcho Pickup J10 (1976-1983), Honcho Pickup J2... 		STEERING LINK FULL KIT, HEAVY DUTY INCLUDES 4 TIE RODS ENDS 72-83 CJ5, 72-77 CJ6, 76-81 CJ7, CJ8 NARROW TRACK #18050.54 & #18050.56 Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles. Replaces: 18050.80 Made in TAIWAN UPC: 804314123765 Label: STEERING LINK FULL KIT, HD CJ
STEERING LINK FULL KIT, HEAVY DUTY INCLUDES 4 TIE RODS ENDS 72-83 CJ5, 72-77 CJ6, 76-81 CJ7, CJ8 NARROW TRACK #18050.54 & #18050.56
Model(s): Jeep CJ5 (1954-1983), Jeep CJ6 (1955-1975), Jee...
Price: $29.45 each Price: $62.86 each Price: Call for Availability Price: $333.38 each
COMMAND THE DARK with Rough Country's affordable set of Black-Series 2-inch Square Cree LED Lights. This all-inclusive kit features everything you need to get going while the compact size makes it perfect for adorning a bumper, hood, roof, or anywhere you can imagine. The black panel design offers jaw-dropping good looks that blend perfectly with any vehicle using black accents like grilles, wheels, bull bars or steps! See the trails at any time of night with 36 watts and 2880 lumens of LED Lighting power. These all-weather lights feature a durable, die-cast aluminum housing and include a premium flat-wound, braided wiring harness with toggle switch and in-line fuse along with a pre-assembled low-profile mounting bracket! Includes Rough Country’s 3-year Warranty. FREE SHIPPING FEATURES 2880 lumens 36 watts 30 degree spot beam Each light contains 6, 3 watt high intensity Cree LEDs Black panel design IP67 Waterproof rating Durable die cast aluminum housing Moisture Breather technology reduces moisture build-up behind the lends Includes premium, flat-wound wiring harness with on/off switch Sold in pairs 3 year warranty (2) 2-inch LED square light Wiring harness On/Off switch Hardware
2in Square Rough Country CREE Black Series LED Fog Lights
Model(s): Honcho Pickup J10 (1976-1983), Honcho Pickup J2... 		Front or Rear Brake Rotors - These are 9" rotors and are an excellent replacement option. These will fit all Jeep CJ models from 1948-1965.
Brake Drums (9" Front Or Rear) - CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J... 		These are excellent replacement Front Brake Wheel Cylinders. These will work for the left or right side in all Jeep CJ models from 1967-1971. These cylinders have a 1 inch bore.
Wheel Cylinder (Front-L Or R) - CJ With 1 Inch Bore
Model(s): Jeep CJ3B (1953-1968), Jeep CJ5 (1954-1983), Je... 		Brand New Replacement Front Hubs. These will fit all models from 1941-1963. These are a great fix option. Make sure to choose whether you have left hand or right hand threads. Photo is shown without the studs. Factory Part Number: 649937 (LH Thread) 649938 (RH Thread)
Hub (Front) - All Models With LH Or RH Thread
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $91.72 each Price: $86.78 each Price: $34.58 each Price: $94.00 each

Jeep Parts Guy.com stocks both new and used factory replacement parts from 1941 - 2008. Our full line is inexpensive and cheaper than our competitors, but the quality is just as good as the OEM parts! We have a full line of lift kits and an endless supply of accessories for Jeeps of all years. We understand that Jeep is the most accessorized vehicle in the market and we are confident that we can take care of your every Jeep need. Jeep Parts Guy is constantly adding new products, if you don't see what you're looking for, chances are we have it. Just give us a call and ask.

Call to Order: 866-235-1979
Credit Card Badges
©2026 Pacific Supply Group | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.