Contact Us New & Updated Parts
Model: Jeep Scrambler CJ8 (1981-1986)
Cart 0 item(s): $0.00
   
Catalog
Accessory Package kits
AMC Books
Axle & Differential Parts
Body Parts
Brake Parts
Chry Book
Clutch & Flywheel Parts
Cooling System Parts
Electrical Parts
Engine Parts
Exhaust Parts
Fuel Parts
Fuel System Parts
Heating & A/C Parts
Kaiser Books
Misc. Parts
Steering System Parts
Suspension Parts
Transfer Case Parts
Transmission Parts
Tune Up Parts
Wiper System Parts
 
PIPE INTERM CJ8 SCRAMBLER 81 6 CYLINDER

Replaces: 41947
Made in USA
UPC: 804314004248
Label: 17608.02 PIPE INTERM C8 81 6-C
PIPE INTERM CJ8 SCRAMBLER 81 6 CYLINDER
Model(s): Jeep MB (1941–1945), Jeep Scrambler CJ8 (1981-1...
 30.875" Accelerator cable (throttle cable) This will fit 1980-1983 Jeep Scrambler, CJ5, and CJ7 with a 2.5L motor. Cables wear out over time, and a broken cable can leave you stranded. Get yours replaced today!
Jeep Accelerator Cable 2.5L
Model(s): Jeep CJ5 (1954-1983), Jeep CJ7 (1976-1986), Jee...
DRIVESHAFT REAR 30.75 CJ8 SCRAMBLER

Replaces: 5362277
Made in USA
UPC: 804314036416
Label: 16591.10 DRIVESFT RR 30.75 CJ8
DRIVESHAFT REAR 30.75 CJ8 SCRAMBLER
Model(s): Jeep MB (1941–1945), Jeep Scrambler CJ8 (1981-1...
TIGERTOP CJ8 SCRAMBLER WITH DOORS BLACK

Replaces: 52309-01
Made in USA
UPC: 804314139100
Label: TIGERTOP C8 WITH DOORS BLK
TIGERTOP CJ8 SCRAMBLER WITH DOORS BLACK
Model(s): Jeep MB (1941–1945), Jeep Scrambler CJ8 (1981-1...
Price: $23.24 each Price: $31.13 each Price: $742.02 each Price: $2352.46 each
These are replacement lug nuts for the following vehicles:

1945-1971 Jeep CJ models (Left Hand Thread)
1945-1986 Jeep CJ models (Right Hand Thread)

Remember to choose Left Hand Thread or Right Hand Thread.
Lug Nut - CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
BODY TUB CJ8 SCRAMBLER 81-85

Replaces: 5763816
Made in PHILIPPINE
UPC: 804314038373
Label: 12002.15 TUB CJ8 81-85
BODY TUB CJ8 SCRAMBLER 81-85
Model(s): Jeep MB (1941–1945), Jeep Scrambler CJ8 (1981-1...
This is a Brand New Hub and Rotor Assembly.  It will fit all CJ models 1978-1981. It has a 7/8\" thick rotor, and a 6 bolt hub. This comes factory assembled (For unassembled hub and rotor see JP239) Hub and rotor ONLY.

Factory Part Number: 5358568A
Hub And Rotor Assembly (Front Axle) - CJ 7/8"
Model(s): Jeep CJ5 (1954-1983), Jeep CJ7 (1976-1986), Jee...
This is a Brand New Hub and Rotor ONLY.  It will fit all CJ models 1981-1986. It has a 7/8\" thick rotor, and a 5 bolt hub. This comes factory assembled (For unassembled hub and rotor see JP241)

Factory Part Number: J5363421A 22lbs
Hub And Rotor ONLY (Front Axle) - CJ 5 Bolt Hub
Model(s): Jeep CJ5 (1954-1983), Jeep CJ7 (1976-1986), Jee...
Price: $1.72 each Price: $8598.23 each Price: $285.33 each Price: $172.03 each
 21.875" Accelerator cable (throttle cable) Broken cables can leave you stranded, get your old warn out cable replaced today.This cable fits 1977-1986 Jeep Scrambler, CJ5, CJ7 with 4.2L and 3.8L motors.
Jeep Accelerator Cable 4.2L-3.8L
Model(s): Jeep CJ5 (1954-1983), Jeep CJ7 (1976-1986), Jee...
STEERING LINK FULL KIT, HEAVY DUTY INCLUDES 4 TIE RODS ENDS 72-83 CJ5, 72-77 CJ6, 76-81 CJ7, CJ8 NARROW TRACK #18050.54 & #18050.56
Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch  ID steel that is cold rolled, pierced, and drawn through dies to tires. The tubes are 1-1/4 inch  ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.                   
Replaces: 18050.80
Made in TAIWAN
UPC: 804314123765
Label: STEERING LINK FULL KIT, HD CJ
STEERING LINK FULL KIT, HEAVY DUTY INCLUDES 4 TIE RODS ENDS 72-83 CJ5, 72-77 CJ6, 76-81 CJ7, CJ8 NARROW TRACK #18050.54 & #18050.56
Model(s): Jeep CJ5 (1954-1983), Jeep CJ6 (1955-1975), Jee...
LIFT, 2 INCH INCH 76-86 CJ5/CJ7/CJ8 SCRAMBLER WITHOUT SHOCKS

Replaces: SJ-J20K
Made in USA
UPC: 804314081171
Label: LIFT,2 76-86 C5/7/8 W/O SHOCKS
LIFT, 2 INCH INCH 76-86 CJ5/CJ7/CJ8 SCRAMBLER WITHOUT SHOCKS
Model(s): Honcho Pickup J20 (1976-1983), Jeep CJ5 (1954-1...
HD TIE ROD, LONG TUBE, 82-86 CJ7, 82-86 CJ8 SCRAMBLER, INCLUDES TWO TIE ROD ENDS
Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.                   
Replaces: 18050.53
Made in TAIWAN
UPC: 804314123703
Label: TUBE+TIE RODS HD 82-86 CJ7/CJ8
HD TIE ROD, LONG TUBE, 82-86 CJ7, 82-86 CJ8 SCRAMBLER, INCLUDES TWO TIE ROD ENDS
Model(s): Jeep CJ7 (1976-1986), Jeep MB (1941–1945), Jeep...
Price: $33.11 each Price: $333.38 each Price: $1580.55 each Price: $191.37 each
This is a Spindle Nut Socket that will fit all Jeep CJ models 1945-1986. This is a deep socket that makes repacking or replacing your wheel bearings much easier!
Spindle Nut Socket - CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Command the dark with Rough Country's set of 2-inch Flush Mount Square Cree LED Lights. These powerful yet small LEDs feature an extended housing to sit flush with your bumper, roof rack, or wherever you can imagine! Once installed, these lights look like an OEM factory upgrade. Light up the road with 36 watts and 2880 Lumens of output power. These all-weather LED lights feature a durable, die-cast aluminum housing and include a wiring harness. Includes Rough Country's 3-Year Warranty. FREE SHIPPING 

FEATURES
2880 lumens
36 watts
30 degree spot beam
Each light contains 6, 3 watt high intensity Cree LEDs
IP67 Waterproof rating
Black panel design
Durable die cast aluminum housing
Moisture Breather technology reduces moisture build-up behind the lends
Includes premium, flat-wound wiring harness with on/off switch
Length: 4.80-inches | Depth: 3.11-inches | Height: 3.63-inches
Mounting hole to mounting hole: 4.15-inches
Sold in pairs
3 year warranty
2in Square Flush Mount Rough Country CREE Black Series LED Fog Lights
Model(s): Honcho Pickup J10 (1976-1983), Honcho Pickup J2...
Brand New Brake Master Cylinder. This will fit the 1978-1986 CJ w/o Power Disc Brake, w/ 2 Bolt Caliper Plate.

Factory Part Number: 8134270
Brake Master Cylinder - CJ W/o Power Disc Brake, W/ 2 Bolt Caliper Plate
Model(s): Jeep CJ5 (1954-1983), Jeep CJ7 (1976-1986), Jee...
HD DRAG LINK, SHORT TUBE, 82-86 CJ7, 82-86 CJ8 SCRAMBLER, INCLUDES TWO TIE ROD ENDS
Beef up your ride with Rugged Ridge steering components. This is a bolt-on solution for preventing bent tie rods from wheeling with larger tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to tires. The tubes are 1-1/4 inch ID steel that is cold rolled, pierced, and drawn through dies to produce a 1/4 in. wall thickness. This is true DOM tubing with NO seams OR welds to fail. Heavy duty 7/8 inch rod ends feature standard tapered ends to fit stock knuckle applications. You get one ton strength without any modifications to your steering knuckles.                   
Replaces: 18050.55
Made in TAIWAN
UPC: 804314123727
Label: DRAG LINK KIT CJ7-8 WIDE T F9
HD DRAG LINK, SHORT TUBE, 82-86 CJ7, 82-86 CJ8 SCRAMBLER, INCLUDES TWO TIE ROD ENDS
Model(s): Jeep CJ7 (1976-1986), Jeep MB (1941–1945), Jeep...
Price: $11.30 each Price: $91.72 each Price: $140.99 each Price: $180.53 each
HOSE GAS FILLER CJ8 SCRAMBLER

Replaces: 5364196
Made in TAIWAN
UPC: 804314036744
Label: 17740.05 HOSE GAS FILLER CJ8
HOSE GAS FILLER CJ8 SCRAMBLER
Model(s): Jeep MB (1941–1945), Jeep Scrambler CJ8 (1981-1...
Rear Brake Drums - These are an excellent replacement option, they will fit all Jeep CJ models from 1978-1986.
Brake Drums (10" Rear) - CJ
Model(s): Jeep CJ5 (1954-1983), Jeep CJ7 (1976-1986), Jee...
Clutch Slave Cylinder - This is specific for the 1980-1983 Jeep CJ with the GM 2.5L engines. (12 month/12,000 mile warranty)

Choose from the drop down menu for the following:

1980-1983 w/ GM 2.5L engine (J3241867)
1983-1986 w/ AMC 2.5L engine (52000070
1980-1986 w/ 258 4.2L engine (J3241867)
1982-1986 w 258 4.2L Right hand drive (J3241869)
Clutch Slave Cylinder - CJ
Model(s): Jeep CJ5 (1954-1983), Jeep CJ7 (1976-1986), Jee...
Semi- metallic Front Disc Brake Pads (Item # 1 in picture)
Brake Pads - CJ Front Disc
Model(s): Jeep CJ5 (1954-1983), Jeep CJ7 (1976-1986), Jee...
Price: $68.52 each Price: $92.04 each Price: $95.36 each Price: $33.09 each

Jeep Parts Guy.com stocks both new and used factory replacement parts from 1941 - 2008. Our full line is inexpensive and cheaper than our competitors, but the quality is just as good as the OEM parts! We have a full line of lift kits and an endless supply of accessories for Jeeps of all years. We understand that Jeep is the most accessorized vehicle in the market and we are confident that we can take care of your every Jeep need. Jeep Parts Guy is constantly adding new products, if you don't see what you're looking for, chances are we have it. Just give us a call and ask.


Call to Order: 866-235-1979
Credit Card Badges
©2026 Pacific Supply Group | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.