Contact Us New & Updated Parts
Model: Jeep CJ3A (1949-1953)
Cart 0 item(s): $0.00
   
Catalog
Accessory Package kits
AMC Books
Axle & Differential Parts
Body Parts
Brake Parts
Chry Book
Clutch & Flywheel Parts
Cooling System Parts
Electrical Parts
Engine Parts
Exhaust Parts
Fuel Parts
Fuel System Parts
Heating & A/C Parts
Kaiser Books
Misc. Parts
Steering System Parts
Suspension Parts
Transfer Case Parts
Transmission Parts
Tune Up Parts
Wiper System Parts
 
This connector is compatible with all standard trailer and DOT approved commercial transportation wiring. If you are converting your tail lights to LED, do it right way with these, made in the USA, over molded terminal connectors that will insure that you never hook them up backwards. LED tail lights are very sensitive to how they are hooked up and this standard LED over molded connector insures that you will never have a problem. LED lights have a few differences from old incandescent light bulbs. This connector organizes your wires in such a way as to prevent any confusion. If you have installed your new LED tail lights, these connectors have to be added to your wiring harness. Once this is done, you are assured a weather and water resistant and reliable connection that only takes seconds. Made in the USA Bullet connector diameter is .155 inches in diameter. .155 diameter is the national standard for trailer and commercial transportation lights.
LED connector over mold for LED lights - Made in USA
Model(s): Honcho Pickup J10 (1976-1983), Honcho Pickup J2... 		1946-1975 Jeep CJ Rear Taillight. Reference Number: 801157 (Left) 801158 (Right) Remember To Specify Left Or Right
CJ Tailights
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J... 		Are your brake lights not coming on when you hit the brakes? If so, chances are your brake switch is bad. Get yours fixed today! This Brake switch will fit the following vehicles: 1941-1945 MB 1945-1959 CJ Factory Part Number: J647801
Brake Light Switch - CJ, MB
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J... 		FIREWALL PLATE CJ2A CJ3A Replaces: PLATE-2A-2 Made in PHILIPPINE UPC: 804314078935 Label: 12025.16 FIREWALL PLATE 2A 3A
FIREWALL PLATE CJ2A CJ3A
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953)
Price: $5.65 each Price: $21.20 each Price: $22.58 each Price: $196.17 each
HOSE UPPER RADIATOR CJ3A Replaces: 649341 Made in MEXICO UPC: 804314011239 Label: 17113.02 HOSE UP RAD CJ3A
HOSE UPPER RADIATOR CJ3A
Model(s): Jeep CJ3A (1949-1953) 		BEZEL HEADLIGHT CJ2A CJ3A Replaces: 643732 Made in TAIWAN UPC: 804314010539 Label: 12419.01 BEZEL HEADLMP 2A 3A
BEZEL HEADLIGHT CJ2A CJ3A
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953) 		This is a Brand New replacement Accelerator Pedals. This will fit the following vehicles: 1941-1945 Jeep MB 1945-1949 Jeep CJ2A 1953-1953 Jeep CJ3A
Accelerator Pedal - MB, CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953) 		1953-66 CJ 9� BRAKE SHOES (LININGS) FRONT OR REAR
Brake Shoes- CJ
Model(s): Jeep CJ3A (1949-1953), Jeep CJ3B (1953-1968), J...
Price: $39.12 each Price: $70.33 each Price: $37.93 each Price: $69.15 each
The sun never sets on a vehicle equipped with Rough Country's sleek 12-inch LED Light Bar. With a powerful 5,760 Lumen 72 Watt output, this LED light is a sight to behold. This all-inclusive kit features an IP67 Waterproof design with a durable, die-cast aluminum housing and included mounting brackets. Includes our 3 year warranty! This product includes Rough Country’s Light Bar Noise Silencers to quickly eliminate hum, whistle, and other wind noises associated with mounted LED Light bars. These handy Noise Silencers snap over the cooling fins firmly, preventing any noise-generating vibrations and ensuring a snug fit that stays in place. Includes a snap-on cover. FEATURES 5760 lumens 72 watts Contains 24, 3 watt High Intensity CREE LEDs 8 degree spot / 90 degree flood combo pattern Black panel design IP67 Waterproof rating Moisture Breather technology reduces moisture build-up behind the lends Includes premium, flat-wound wiring harness with on/off switch Includes Base and End mounts Includes snap-on cover Durable die-cast aluminum housing Noise Silencers eliminate hum, whistle, and other wind noises associated with mounted LED Light bars Length: 14.125-inches | Depth: 3.45-inches | Height: 3-inches Bolt Diameter: 8mm 3 year warranty 12-inch LED Light Bar Wiring harness On/Off switch Light Cover Noise silencers Hardware
12in CREE Black Series Dual Row LED Light Bar
Model(s): Honcho Pickup J10 (1976-1983), Honcho Pickup J2... 		This is a Brand New Intake Manifold for the 4 cyl L-Head engines in the following vehicles: 1941-1945 Jeep MB and GPW 1945-1949 Jeep CJ2A 1948-1953 Jeep CJ3A 1953-1953 Jeep CJ3B
Intake Manifold - MB, CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953) 		These are replacement lug nuts for the following vehicles: 1945-1971 Jeep CJ models (Left Hand Thread) 1945-1986 Jeep CJ models (Right Hand Thread) Remember to choose Left Hand Thread or Right Hand Thread.
Lug Nut - CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J... 		These are the Left or Right Front Brake Wheel Cylinders. If yours are leaking get them replaced today! These will fit the following vehicles: 1941-1945 Jeep MB (Left or Right) 1945-1949 Jeep CJ2A (Left or Right) 1948-1953 Jeep CJ3A (Left or Right) 1950-1952 Jeep M38 (Left or Right 1953-1953 Jeep CJ3B (Left or Right)
Wheel Cylinder (L Or R Front Brake) - MB, CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $151.37 each Price: $164.78 each Price: $1.89 each Price: $33.48 each
HOOD WILLYS-MARK CJ2A, CJ3A Replaces: DMC-670969 Made in PHILIPPINE UPC: 804314070083 Label: HOOD WILLYS-MARK 2A,3A
HOOD WILLYS-MARK CJ2A, CJ3A
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), W... 		Ignition Module, will fit: 1941-71 4 CYL Go Devil 134 ENGINE W/ ELECTRONIC DISTRIBUTOR
Ignition Module - 4 Cyl 134
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J... 		SEAT FRAME RH CJ3A Welded tubular steel and stamped steel construction. Replaces: A-2925-3A Made in PHILIPPINE UPC: 804314067137 Label: 12011.14 SEAT FRAME RH 3A
SEAT FRAME RH CJ3A
Model(s): Jeep CJ3A (1949-1953) 		This is a Spindle Nut Socket that will fit all Jeep CJ models 1945-1986. This is a deep socket that makes repacking or replacing your wheel bearings much easier!
Spindle Nut Socket - CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $742.61 each Price: $142.92 each Price: $382.16 each Price: $12.43 each
CJ Fuel Filler Tube Grommet
Jeep CJ Fuel Filler Grommet
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J... 		9" Jeep CJ and MB riveted brake lining sets (w/o steel) These will fit the following: 1941-45 MB 1945-49 CJ2A 1948-53 CJ3A 1953-65 CJ3B 1955-66 CJ5
Brake Linings - CJ, MB 9"
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J... 		FENDER RH M38 CJ3A/B Replaces: 681230-3A Made in PHILIPPINE UPC: 804314147068 Label: 12004.04 FENDER RH M38 3A/B
FENDER RH M38 CJ3A/B
Model(s): Jeep CJ3A (1949-1953) 		This is a headlight switch that will fit a 1946-1971 CJ. Factory Part Number: J946613
Headlight Switch - CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $10.26 each Price: $34.06 each Price: $596.77 each Price: $51.92 each

Jeep Parts Guy.com stocks both new and used factory replacement parts from 1941 - 2008. Our full line is inexpensive and cheaper than our competitors, but the quality is just as good as the OEM parts! We have a full line of lift kits and an endless supply of accessories for Jeeps of all years. We understand that Jeep is the most accessorized vehicle in the market and we are confident that we can take care of your every Jeep need. Jeep Parts Guy is constantly adding new products, if you don't see what you're looking for, chances are we have it. Just give us a call and ask.

Call to Order: 866-235-1979
Credit Card Badges
©2026 Pacific Supply Group | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.