Contact Us New & Updated Parts
Model: Jeep CJ2A (1945-1949)
Cart 0 item(s): $0.00
   
Catalog
Accessory Package kits
AMC Books
Axle & Differential Parts
Body Parts
Brake Parts
Chry Book
Clutch & Flywheel Parts
Cooling System Parts
Electrical Parts
Engine Parts
Exhaust Parts
Fuel Parts
Fuel System Parts
Heating & A/C Parts
Kaiser Books
Misc. Parts
Steering System Parts
Suspension Parts
Transfer Case Parts
Transmission Parts
Tune Up Parts
Wiper System Parts
 
These are replacement lug nuts for the following vehicles:

1945-1971 Jeep CJ models (Left Hand Thread)
1945-1986 Jeep CJ models (Right Hand Thread)

Remember to choose Left Hand Thread or Right Hand Thread.
Lug Nut - CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...

Emergency Brake Cables - ALL MODELS
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
BOLT T WINDSHIELD ADJUSTER CJ2A

Replaces: 669031
Made in PHILIPPINE
UPC: 804314011703
Label: 12025.07 BOLT T W/S ADJ 2A
BOLT T WINDSHIELD ADJUSTER CJ2A
Model(s): Jeep CJ2A (1945-1949)
1946-1975 Jeep CJ Rear Taillight.

Reference Number: 801157 (Left) 801158 (Right)

Remember To Specify Left Or Right
CJ Tailights
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $1.72 each Price: Call for Availability Price: $31.61 each Price: $19.27 each
WIRING HARNESS CJ2AL WITH TS

Replaces: 643261T
Made in USA
UPC: 804314146382
Label: 17201.04 WIRING HARN 2AL W/ TS
WIRING HARNESS CJ2AL WITH TS
Model(s): Jeep CJ2A (1945-1949)
FRAME WINDSHIELD WILLYS CJ2A

Replaces: DMC-663628
Made in PHILIPPINE
UPC: 804314070069
Label: FRAME WS WILLYS 2A
FRAME WINDSHIELD WILLYS CJ2A
Model(s): Jeep CJ2A (1945-1949), Willys Jeep Truck (1947-...
GRILLE CJ2A-EARLY 45-46

Replaces: DMC-663536
Made in PHILIPPINE
UPC: 804314070052
Label: GRILLE 2A-EARLY 1945-46
GRILLE CJ2A-EARLY 45-46
Model(s): Jeep CJ2A (1945-1949)
This Tie Rod will fit the early model Willys Jeeps from 1942-1953. This is a common suspension part that needs replacing, check yours out today. Make sure you specify left or right.
Willys Jeep Tie Rod End
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $651.55 each Price: $1121.65 each Price: $496.42 each Price: $74.04 each
This a Front Hub Dust Cap. Keep the dirt and dust out of your wheel bearings. This will fit the following vehicles:

1941-1945 Jeep MB
1945-1964 Jeep CJ models

Factory Part Number: J0641920
Dust Cap (Front Hub) - CJ, MB
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
This is a Brand New replacement Accelerator Pedals. This will fit the following vehicles:

1941-1945 Jeep MB
1945-1949 Jeep CJ2A
1953-1953 Jeep CJ3A
Accelerator Pedal - MB, CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953)
Rough Country's 12-inch Single Row LED Light Bars offer quick and easy off-road lighting for your truck or Jeep. The included mounting systems are compatible with a 1/4-inch post making it easy to attach just about anywhere a halogen light could mount! Includes a set of fixed-position end mounts and adjustable track base mounts, providing you with multiple options to mount your light wherever you need to with full adjustability. FREE SHIPPING 

Rough Country's single-row LED light bars feature CREE LED's outputting 4800 Lumens and 60 watts of lighting power. Includes a mountable on/off switch, included mounting brackets, wiring harness, snap-on cover and our 3 Year Warranty!
FEATURES
4800 lumens
60 watts
Contains 12, 5 watt High Intensity CREE LEDs
30 degree spot beam
Black panel design
IP67 Waterproof rating
Durable die cast aluminum housing
Moisture Breather technology reduces moisture build-up behind the lends
Includes premium, flat-wound wiring harness with on/off switch
Includes snap-on cover
Features both end mounts and adjustable base mounts for multiple mounting solutions
Noise Silencers eliminate hum, whistle, and other wind noises associated with mounted LED Light bars
3 year warranty
12-inch LED Light Bar
Wiring harness
On/Off switch
Snap-on cover
Hardware
12in CREE Black Series Single Row LED Light Bar
Model(s): Honcho Pickup J10 (1976-1983), Honcho Pickup J2...
This is an Upper Gasket set for the L-Head 134 "Go Devil" Engine. Will fit 1941 -1953 CJ, Jeepster, and M38.

Factory Part Number: 802030
Gasket Set (Upper) - 134 L-Head
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $5.74 each Price: $34.48 each Price: $114.67 each Price: $43.07 each
This Ignition Switch will fit: 1941-1963 ALL EARLY MODEL FLOOR TYPES.

Reference Number: A-7225
Ignition Switch - Floor Type
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
COWL TOP PLATE CJ2A CJ3A

Replaces: 671061
Made in PHILIPPINE
UPC: 804314011758
Label: 12025.11 COWL TOP PLATE 2A 3A
COWL TOP PLATE CJ2A CJ3A
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953)
******NOT AVAILABLE*******Just let the rusty part sit in the solution for 30 minutes and the rust will be converted back in to metal.
The safest rust remover on the market.
No acids, VOC's or fumes, safe on skin and eyes, removes rust on bare metal. NOT poisonous,  water based and non flammable, PH neutral, biodegradable and ready to use. 

You will love it.   MOST EFFECTIVE RUST REMOVER WE HAVE EVER USED.
Rust Remover - Evapo-rust
Model(s): Honcho Pickup J10 (1976-1983), Honcho Pickup J2...
This is a Front Hub Spindle Nut and Tabbed Washer. Comes with 2 nuts and 2 washers. This will fit all Jeep CJ models 1945-1986.
Front Hub Spindle Nut And Washer - CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $28.85 each Price: $317.64 each Price: Call for Availability Price: $13.06 each
Brand New Replacement Front Hubs. These will fit all models from 1941-1963. These are a great fix option. Make sure to choose whether you have left hand or right hand threads. Photo is shown without the studs.

Factory Part Number: 

649937 (LH Thread)
649938 (RH Thread)
Hub (Front) - All Models With LH Or RH Thread
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
These Lug nuts will fit the following vehicles:

1941-1945 Jeep MB
1945-1946 Early Jeep CJ2A

Remember to choose between right hand thread or left hand thread.
Lug Nut - MB, CJ2A
Model(s): Jeep CJ2A (1945-1949)
WINDSHIELD FRAME INNER CJ2A

Replaces: 663694
Made in PHILIPPINE
UPC: 804314011628
Label: 12025.03 FRAME W/S INNER 2A
WINDSHIELD FRAME INNER CJ2A
Model(s): Jeep CJ2A (1945-1949)
These are Brand New replacement carburetors. They are Solex design for the 4 cyl F Head Go Devil engine, and the L Head, these are an excellent option to get your Jeep running today! These will fit the following vehicles:

1941-1945 Jeep MB and GPW
1946-1949 Jeep CJ2A
1948-1953 Jeep CJ3A
1955-1965 Jeep CJ3B
1955-1971 Jeep CJ5
1955-1965 Jeep CJ6

Remember to Specify your year range in the drop down menu above.
Carburetor - MB, CJ
Model(s): Jeep CJ2A (1945-1949), Jeep CJ3A (1949-1953), J...
Price: $94.00 each Price: $2.54 each Price: $393.10 each Price: $252.10 each

Jeep Parts Guy.com stocks both new and used factory replacement parts from 1941 - 2008. Our full line is inexpensive and cheaper than our competitors, but the quality is just as good as the OEM parts! We have a full line of lift kits and an endless supply of accessories for Jeeps of all years. We understand that Jeep is the most accessorized vehicle in the market and we are confident that we can take care of your every Jeep need. Jeep Parts Guy is constantly adding new products, if you don't see what you're looking for, chances are we have it. Just give us a call and ask.


Call to Order: 866-235-1979
Credit Card Badges
©2026 Pacific Supply Group | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.